My Digital Story

Just to make live easier…

Celcom launches Broadband Prepaid™

Most of the complaint that I received from many of my friends related to 3G broadband service was the monthly commitment on top of their existing phone bill. They said they do not really use that. Well, it is no longer the case now with Celcom Broadband Prepaid™. This is the first of such service in Malaysia.

The Broadbank Prepaid is a ready-to-use package with speeds of up to 384Kbps and van be used without having to register. There will be two packages- RM20 per week or RM6 for 24 hours of use.

The starter pack of this prepaid plan is RM25 which include RM20 credit. To subscribe to either of these packages, users have to activate their SIM card and choose the plan using SMS.

For further information, please refer HERE.

24/03/2009 Posted by | Networking, Windows Mobile | Leave a comment

Transform your Pocket PC as Wireless WIFI Router

WMWiFiRouter

graphic

This piece of beta software called, WMWifiRouter has been in my Pocket PC for almost a year I think, however I rarely use it.

WMWifiRouter will make your Pocket PC as a wireless WIFI router so that you may connect your laptop or any other WIFI enable devices to internet.The Pocket PC will connect to Internet using the standard Internet Sharing Connection which utilise the 3G or HSDPA broadband access.

WMWIFiRouter

The reason why I rarely use this software was that, for most of the time, like many other users, the most common way of getting internet access using Pocket PC is through USB cable or Bluetooth which also use ICS. WMWifiRouter will be very useful when no cable or the computer does not have Bluetooth connection.

WMWifiRouter will create ad-hoc (device-to-device) WIFI SSID (the SSID will appear as WMWifiRouter) from your Pocket PC so that any WIFI enable devices can connect to it. The only weakness by using this application is will drain the battery pretty fast since WIFI utilize substantial amount of power. So, you might want to hook up power adaptor to your Pocket PC when you use this application.

version 0.95

Currently, this software is already distributed commercially (under version 1.25), however, the copy that I have is in Beta (0.89) which I think still work very well.  You may want to download this application HERE.

12/03/2009 Posted by | Windows Mobile | | 5 Comments

DXHI1/XXHI2, the best Samsung Omnia i900’s ROM for me so far

By today, it is more than 2 weeks, my Samsung Omnia  running on DXHI1 (for PDA) and XXHI2 (for phone). The performance is just beyond my expectation.

The battery performance is great, more than 2 and half days which I can claim the longest compared to other Windows Mobile phones that I used before.

Functionality and voice clarity are almost perfect.

You may get the download links for the ROM in modaco.com website. The direct link to the ROM download thread can be found HERE.

Just a note, please make sure you hard reset the phone right after you upgrade to the new ROM.

14/10/2008 Posted by | Windows Mobile | , , , | 3 Comments

Sync Windows Mobile Contacts to Thunderbird Address Book

I am still recovering from fever today, but my passion with Windows Mobile seemed to defeat my fever.

I just completed another important trick for Windows Mobile. To sync Windows Mobile (WinMo) contacts to Thunderbird Address Book.

My Windows Mobile is synced to my corporate Exchange Server. So all my emails, contacts, calendar, tasks are synced perfectly with my Microsoft Outlook in my office PC. There is no issue at all since Windows Mobile is Microsoft and Exchange Server is also Microsoft.

It is a different story when I want to sync my contacts in the Windows Mobile to my personal notebook which is using Thunderbird as the  mail client. I just can not afford to buy a Microsoft Outlook. To have an original copy of Microsoft Office Student & Home edition is good enough for me. In fact I managed to buy the copy at a promotional price of RM199 only during last Ramadhan (September 2008).

There is a freeware for you to accomplish this task. It is called finchsync.

The good feature about this application is you can sync wirelessly or using USB cable from your WinMo to the notebook (the notebook must be switch on though). For wireless, you need to use Wifi from your wireless router where the WinMO and your notebook can reach each other using the Private Address Range (IP address that start usually 192.168.XXx.XXx).

If you want to sync using the USB, the IP address could be something different (169.254.2.2) on for your PC while the WinMo will have the IP of 169.254.2.1)

It works by setting-up a server in your host pc/notebook and your Windows Mobile will act as the client to access the finchsync server.

The finchserver will connect to your Thunderbird Address Book (the address book with *.mab extension resides in C:\Documents and Settings\XXX\Application Data\Thunderbird\Profiles\uwlfu7s8.default\abook.mab) while thee finchsync client on the Windows Mobile will get your information from the device PIM database. Then the application will sync to one another.

First you need to download the PC server application HERE. Notice that the file is *.jar mean it is a java application. So make sure you have Java Runtime Environment installed in your PC.

Next you need to download and install the client application. You can directly download the CAB version directly to your Pocket PC from HERE.

ON THE PC SERVER

It takes just three steps to install the server on your PC:

  1. Create a directory ‘FinchSync’ (or what name you like) on your hard drive.
  2. Download the jar-archive ‘FinchSync.jar’ from the download area.
  3. Store the file in the created directory.

That’s all. No registry entries, no DLLs spread over your system.

Now browse to the directory where you keep the finchsync and open it.

Notice the IP address correctly. To get the IP address, connect your pocket pc to the usb and let the activesync to run. then only you click the finchsync to run and get the IP address

Notice the IP address correctly because that is the IP address that you'll need when configuring on the client side

If you sync using the wireless method, make sure you configure your firewall (Kaspersky, Windows standard firewall, or any other firewalls) to accept incoming/outgoing signal from your Windows Mobile device.

Now, let configure the PC server.

Server Setting

Click File and go to Server Configuration

Enter the port number (can be from 0 to 65535 and only one application at a time may register for a single port.) To be safe, just use 8080

Enter the port number (can be from 0 to 65535 and only one application at a time may register for a single port.) To be safe, just use 8080

A good choice for alternative port numbers is the range from 8080 to 8087. Try any of these numbers until FinchSync starts without an error message. Remember, you must restart FinchSync to use the new settings.

If you are using a Firewall on your system, you must open the specified port. If you get a message from the firewall, that ‘java’ or ‘FinchSync’ is trying to open a port, you MUST allow this action, or a client will not be able to connect to the server.

Setup the administrator account

The server FinchSync has a (very small) web-interface. If you have trouble connecting your PocketPC with the server, you might first try to access the web-interface with PocketOutlook.

Further you can shutdown the server from the web-interface, if you enter your admin login. If the server is running, you can access the web-interface using the url:

http://<ip>:<port>/status

Example:

http://192.168.1.1:8080/status
just to test that the server is running in the background. Finchsync.jar must be running for this to work

just to test that the server is running in the background. Finchsync.jar must be running for this to work

Sync sources provide contacts, tasks or appointments, which can be synchronized with external clients. A sync source can provide single types of items or a combination of multiple types of items. Typically an address book source provides contacts, and a calendar source provides tasks and appointments.

Before you can synchronize information with your Pocket PC, you must specify what information you’d like to synchronize. The Mozilla address book, for example, is able to manage multiple different address books. Each of those address books may be a single sync source for FinchSync.

To manage sync sources, select the ‘Sync Sources’ tab from the main-window:

The auto scan does not work for me, so I jsut browse the *mab Address Book manual to the directory that I stated  earlier

The auto scan does not work for me, so I jsut browse the *mab Address Book manual to the directory that I stated earlier

Click Add



Next you will need to link the server to the right Thunderbird Address Book database which
has the *.mab extension. The directory is somewhere here: C:\Documents and Settings\XXX\Application Data
\Thunderbird\Profiles\uwlfu7s8.default\abook.mab

It is faster to access manually. In my case, the scan give nothing of the mab file.

Add a Client

Client is your Windows Mobile.

make sure the password have both alpha and numeric at least 6 characters

make sure the password have both alpha and numeric at least 6 characters. Do not click readonly if you want both side to write to each other

  • Enter a new, unique name, using only characters and numbers. (The name can’t be changed, once the account is created.)
  • Enter a password with at least 6 characters.
  • Enter a description (optional).
  • Press ‘Add’ to add sync sources to the client account. Only these sources can be accessed by the client.

ON THE CLIENT (Window Mobile)

Once you have install the application in your device, launch it and start to configure the server setting

The first screen once you launch the finch on your pocket pc

The first screen once you launch the finch on your pocket pc

Click Config to configure the server

Here you need to enter the IP address and the port number that your server has.

Also enter the login and password that you have specify in the finchsync application on your PC.

To validate the setting, press “Test”

If everything is OK, you will get connected to the server.

Synchronization

The synchronization is initiated from the main window.

  • Select a server from the drop-down list.
  • Press ‘Sync it!’

First all running Pocket Outlook applications are closed (PocketOutlook is just one application running on your PocketPC, but it is shown to the user as four different applications: Calendar, Contacts, Tasks and Email windows).

This is necessary, because Pocket Outlook will not reflect changes made in the database while it is running. You should finish work with these applications, before you start the synchronization. This may fail in some cases. See FAQ topic nr. 5 for more details.

Then all items are read from Pocket Outlook database (PIM) and checked for changes. This may take some time, especially if there are many items in the database.

Then the selected server is contacted and the synchronization is performed. At the end a success-message is displayed or errors are reported.

For details, choose ‘Config/View log’ to open the synchronization log:

Good Luck!

10/10/2008 Posted by | Windows Mobile | , , | 2 Comments

Samsung OMNIA DXHH1 ROM ready for download!

Dear All Samsung OMNIA i900 users,

Those who are looking a the new DXHH1 ROM for the Samsung OMNIA i900, you can get the file directly from HERE.

But I strongly recommend that you read all the user discussion in the thread HERE.

Warning: Since this ROM is reconstructed from my OMNIA and not officially made available on the web by Samsung, so please use and do it at your own risk.

25/08/2008 Posted by | Windows Mobile | , , , | 4 Comments